Flagging of test results is not possible on the meter itself. However, if a patient chooses to do so, they can add this information via the mySugr app.

Flagging of test results is not possible on the meter itself. However, if a patient chooses to do so, they can add this information via the mySugr app.

Test results may be seen in 7, 30 and 90‑day averages.

Comments cannot be added on the meter, but can be done via the diabetes management software.

Pattern detection cannot be done on the meter, but can be done via the mySugr app. This is a feature that enables the user to look for specific out-of-target BG results that form a pattern.

The target range is set by default at 70–180 mg/dL (3.9–10.0 mmol/L). The target range can be set from a lower limit of 60–140 mg/dL (3.3–7.8 mmol/L) to an upper limit of 90–300 mg/dL (5.0–16.6 mmol/L).​

This feature is no available on the Accu-Chek Instant S meter.​

Yes, the target ranges in the meter can be changed using the device settings on the diabetes management software.

Being too low is life threatening for people with diabetes. Therefore, red has been chosen to be the color indicating “danger”.​

With the Accu‑Chek Instant S meter, it is not necessary to delete stored results. Once 720 blood glucose results are in the memory; adding a new result causes the oldest one to be deleted. Additional editing solutions for results are available with the diabetes management software.

720 readings can be stored in the meter. Only the last result is viewable on the meter.

Flagging of test results is not possible on the meter itself. However, if a patient chooses to do so, they can add this information via the mySugr app.

Flagging of test results is not possible on the meter itself. However, if a patient chooses to do so, they can add this information via the mySugr app.

Test results may be seen in 7, 14, 30 and 90‑day averages.

Comments cannot be added on the meter, but can be done via the mySugr app

Pattern detection cannot be done on the meter, but can be done via the mySugr app. This is a feature that enables the user to look for specific out-of-target BG results that form a pattern.

The target range is set by default at 70–180 mg/dL (3.9–10.0 mmol/L). The target range can be set from a lower limit of 60–140 mg/dL (3.3–7.8 mmol/L) to an upper limit of 90–300 mg/dL (5.0–16.6 mmol/L).​

This feature is no available on the Accu-Chek Instant meter.​

Yes, the target ranges in the meter can be changed using the device settings on the mySugr app.​

Being too low is life threatening for people with diabetes. Therefore, red has been chosen to be the color indicating “danger”.​

With the Accu‑Chek Instant meter, it is not necessary to delete stored results. Once 720 blood glucose results are in the memory; adding a new result causes the oldest one to be deleted. Additional editing solutions for results are available with the Accu‑Chek mySugr app.

720 readings can be viewed and stored in the meter.

Flagging of test results is not possible on the meter itself. However, if a patient chooses to do so, they can add this information via the mySugr app.

Flagging of test results is not possible on the meter itself. However, if a patient chooses to do so, they can add this information via the mySugr app.

Flagging of test results is not possible on the meter itself. However, if a patient chooses to do so, they can add this information via the mySugr app.

Test results may be seen in 7, 14, 30 and 90‑day averages.

Comments cannot be added on the meter, but can be done via the mySugr app

Pattern detection cannot be done on the meter, but can be done via the mySugr app. This is a feature that enables the user to look for specific out-of-target BG results that form a pattern.

The target range is set by default at 70–180 mg/dL (3.9–10.0 mmol/L). The target range can be set from a lower limit of 60–140 mg/dL (3.3–7.8 mmol/L) to an upper limit of 90–300 mg/dL (5.0–16.6 mmol/L).​

This feature is no available on the Accu-Chek Instant meter.​

Yes, the target ranges in the meter can be changed using the device settings on the mySugr app.​

Being too low is life threatening for people with diabetes. Therefore, red has been chosen to be the color indicating “danger”.​

With the Accu‑Chek Instant meter, it is not necessary to delete stored results. Once 720 blood glucose results are in the memory; adding a new result causes the oldest one to be deleted. Additional editing solutions for results are available with the Accu‑Chek mySugr app.

720 readings can be viewed and stored in the meter.